Shop

Add to cart

Quick View

Starlink Actuated Gen 2 Mesh WiFi Router

KSh 35,000.00

*Price includes shipping and handling fees

Starlink Mesh WiFi Routers can be used either as a primary router or a mesh router to wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.See installation guide below for more setup details and tips. We recommend a maximum of 3 Mesh WiFi routers per Starlink network setup. Please note Flat HP purchases after April 11th 2024, will likely require purchase of an HP 2M Starlink router cable to connect a Starlink Mesh router as your primary router.

Compatibility: Compatibility: Rectangular Starlink Kit, Standard Actuated Kit, Flat High Performance, High Performance Starlink App required.

Package Dimensions: 8.8″ x 11.3″ x 4″ / 22.4 x 28.6 x 10 cm

Package Weight: 3.75 lbs / 1.72 kg

Add to cart

Quick View

Starlink Actuated Long Wall Mount

KSh 20,000.00

*Price includes shipping and handling fees

Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.

Compatibility: Standard Actuated Starlink, High Performance Starlink

Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, Pencil

Mount Dimensions: Length: 16.8″ / 42.7 cm, Width: 4.84″ / 12.3 cm, Height: 4.44″ / 11.3 cm

Package Dimensions: 19.1″ x 5.5″ x 4.7″ / 48.5 x 14 x 11.9 cm

Package Weight: 3.3 lbs / 1.5 kg

Add to cart

Quick View

Starlink Standard V3 Masonry Routing Kit

Starlink Actuated Masonry Routing Kit

KSh 17,000.00

*Price includes shipping and handling fees

Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bits, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder, Goggles, Gloves, and Mask

Package Dimensions: 13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm

Package Weight: 2.1 lbs / 1 kg

Add to cart

Quick View

Starlink Actuated Ground Pole Mount

KSh 19,000.00

*Price includes shipping and handling fees

Designed for in-ground installation when roof or wall mounting is not possible. Requires digging.

Compatibility: Standard Actuated Starlink

Tools Needed: Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and Water

Mount Dimensions: Height: 88.9″ / 225.8 cm, Outer Diameter: 1.88″ / 4.8 cm, Inner Diameter: 1.75″ / 4.45 cm

Package Dimensions: 45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cm

Package Weight: 9.43 lbs / 4.27 kg

Add to cart

Quick View

Starlink Actuated Pivot Mount

KSh 17,000.00

*Price includes shipping and handling fees

Designed for installation on shingled roofs, requires drilling. Not recommended for tile, slate, and clay roofing. For best results, the mount should be adjusted to ensure Starlink is installed as close to vertical as possible.

Compatibility: Standard Actuated Starlink, High Performance Starlink

Tools Needed: Drill, 1/2″ (12.7 mm) Socket Wrench, 5/32″ (4 mm) Drill Bit

Mount Dimensions: Length: 8.66″ / 22 cm, Width: 4.3″ / 11 cm, Height: 6.14″ / 15.6 cm

Package Dimensions: 9.7″ x 5.5″ x 3.1″ / 24.7 x 14 x 7.9 cm

Package Weight: 2.2 lbs / 1.0 kg

Obstruction Guidanc

Add to cart

Quick View

Standard Actuated Starlink Replacement Cable 45 m

KSh 35,000.00

*Price includes shipping and handling fees

The 150’ cable is designed to replace the cable from the Standard Actuated Starlink when additional length is needed between your install location and the router.

Compatibility: Standard Actuated Starlink

Tools Needed: N/A

Package Dimensions: 12.2” x 3.5” x 12.8” / 31.1 x 8.9 x 32.3 cm

Package Weight: 6 lbs / 2.75 kg

Add to cart

Quick View

Starlink Actuated Kit Ethernet Adapter – DISCOUNTED

KSh 15,000.00

*Price includes shipping and handling fees

The Starlink Ethernet Adapter is designed to connect a device directly to the Starlink router for a wired Internet connection. Supports up to 1 Gbps speeds. NOTE: This product is for indoor use only.

Compatibility: Gen 2 Starlink Router

Tools Needed: N/A

Package Dimensions: 6.5” x 4.5” x 1.5” / 16.5 x 11.4 x 3.6 cm

Package Weight: 0.33 lbs / 0.15 kg

Add to cart

Quick View

Starlink Actuated Cable Routing Kit

KSh 15,000.00

*Price includes shipping and handling fees

Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Drill, Stud / Electrical Finder

Package Dimensions: 3.75″ x 5.25″ x 1.75″ / 34.9 x 13.3 x 4.4 cm

Package Weight: 0.83 lbs / 0.38 kg

Add to cart

Quick View

Starlink Actuated Pipe Adapter

KSh 16,000.00

*Price includes shipping and handling fees

Designed to attach to any pole with a max diameter of 2.5″ (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.

Compatibility: Standard Actuated Starlink, High Performance Starlink

Tools Needed: N/A

Package Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cm

Package Weight: 1.35 lbs / 0.6 kg

Add to cart

Quick View

Starlink Actuated Short Wall Mount

KSh 17,000.00

*Price includes shipping and handling fees

Designed for installation on an exterior wall near the top of the gable. Drilling required. For overhang clearance, please reference the installation guide.

Compatibility: Standard Actuated Starlink, High Performance Starlink

Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32″ (4 mm) Drill Bit, 0.5″ x 2.5″ (12.5 x 63.5 mm) Socket, Pencil

Mount Dimensions: Length: 2.77″ / 7 cm, Width: 2″ / 5.1 cm, Height: 6.02″ / 15.3 cm

Package Dimensions: 8.3″ x 5.5″ x 3.4″ / 21 x 14 x 8.7 cm

Package Weight: 1.4 lbs / 0.6 kg

Add to cart

Quick View

Starlink Standard V3 Ridgeline Mount

KSh 100,000.00

*Price includes shipping and handling fees

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility: Standard Starlink

Tools Needed: None

Mount Package Dimensions: 29.8” x 25.8″ x 4.0” / 75.6 x 65.6 x 10.1 cm

Mount Package Weight: 12.8 lbs / 5.8 kg

Ballast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cm

Ballast Package Weight: 55.8 lbs / 25.3 kg

Add to cart

Quick View

Starlink Standard V3 Ridgeline Mount Nairobi

KSh 100,000.00

*Price includes shipping and handling fees

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility: Standard Starlink

Tools Needed: None

Mount Package Dimensions: 29.8” x 25.8″ x 4.0” / 75.6 x 65.6 x 10.1 cm

Mount Package Weight: 12.8 lbs / 5.8 kg

Ballast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cm

Ballast Package Weight: 55.8 lbs / 25.3 kg

Add to cart

Quick View

Starlink Standard V3 Ridgeline Mount Kenya

KSh 100,000.00

*Price includes shipping and handling fees

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility: Standard Starlink

Tools Needed: None

Mount Package Dimensions: 29.8” x 25.8″ x 4.0” / 75.6 x 65.6 x 10.1 cm

Mount Package Weight: 12.8 lbs / 5.8 kg

Ballast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cm

Ballast Package Weight: 55.8 lbs / 25.3 kg

Add to cart

Quick View

Starlink Standard V3 Ridgeline Mount Sudan

KSh 100,000.00

*Price includes shipping and handling fees

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility: Standard Starlink

Tools Needed: None

Mount Package Dimensions: 29.8” x 25.8″ x 4.0” / 75.6 x 65.6 x 10.1 cm

Mount Package Weight: 12.8 lbs / 5.8 kg

Ballast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cm

Ballast Package Weight: 55.8 lbs / 25.3 kg

Add to cart

Quick View

Starlink Standard Gen 3 Router Mount

KSh 45,000.00

*Price includes shipping and handling fees

The Router Mount is designed to mount the Gen 3 Router directly to a wall or other surface. It is ideal for home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Router Mount is installed, the Gen 3 Router is easily snapped into place and cable retention ensures the cables are not accidentally pulled out.

Compatibility: Starlink Gen 3 Router

Recommended Tools: Drill, Marker, #2 Phillips Screwdriver, 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)

Package Dimensions: 25 x 16.5 x 8.5 cm / 9.8″ x 6.5″ x 3.3″

Package Weight: 0.34 kg (0.75 lbs)

Add to cart

Quick View

Starlink Standard V3 Mobility Mount

*Price includes shipping and handling fees

The Mobility Mount is designed to create a waterproof seal and protect against water ingress when permanently mounting to wood, fiberglass, metal, plastic and slotted rails on vehicle racks. The Mobility Mount features stainless steel fasteners, which are corrosion resistant to support harsh environments. This durable and versatile mount also supports an 8 degree mounting angle to maintain a signal during extreme and wet weather conditions.

Compatibility: Standard Starlink

Tools Needed: Drill, 5 mm (3/16 in) drill bit, 9 mm (3/8 in) drill bit, 14 mm wrench, 13 mm wrench, pen

Package Dimensions: 185.5 x 249.9 x 86 mm / 7.3” x 9.8″ x 3.4”

Package Weight: 880 g / 1.94 lbs

Check for Obstructions

Quick View

Starlink Standard V3 Starlink Replacement Cable 15m

*Price includes shipping and handling fees

The 15 m (49 ft) Starlink Cable is designed to replace the cable between the Starlink and the Power Supply when additional length is needed.

Compatibility: Standard Starlink Kit

Package Dimensions: 22 x 51.6 x 6.4 cm / 8.7″ x 20.3″ x 2.5″

Package Weight: 2.9 kg / 6.39 lbs

Quick View

Starlink Standard V3 Starlink Replacement Cable 45m

*Price includes shipping and handling fees

The 45 m (147 ft) Starlink Cable is designed to replace the cable between the Starlink and the Power Supply when additional length is needed.

Compatibility: Standard Starlink Kit

Package Dimensions: 22 x 51.6 x 6.4 cm / 8.7″ x 20.3″ x 2.5″

Package Weight: 2.9 kg / 6.39 lbs

Quick View

Starlink Standard V3 Pivot Mount

Standard Pivot Mount

Ideal for installation on slanted, shingled roofs. The Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions, thus maximizing the performance of your Starlink.

Quick View

Starlink Standard V3 Wall Mount

Standard Wall Mount

Designed for installation on an exterior wall near the top of the gable or fascia. This wall mount can accommodate a 4” overhang maximum and offers a secure, long-reaching platform to optimize the placement of your Starlink for the best connectivity and performance.

Compatibility: Standard Starlink

Kit Contents: Wall Mount, 2x Lag Screws, Silicone Sealant, 40x Wall Clips

Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 1/4″ (6 mm) Drill Bit, 9/16″ (14.2mm) Socket, Pencil

Package Dimensions: 11.1″ x 18.5″ x 4.1″ / 280 x 470 x 105 cm

Package Weight: 3.5 lbs / 1.6 kg

How To Video

Quick View

Starlink Standard V3 Pipe Adapter

*Price includes shipping and handling fees
The Starlink Standard Pipe Adapter is designed to attach to any existing pole with a minimum diameter of 31 mm (1.25 in) and a maximum diameter of 63.5 mm (2.5 in). This adaptable and sturdy mount allows seamless installation onto a variety of pole sizes, offering flexibility and ease in positioning your Starlink for optimal performance.

Crafted from durable, weather-resistant materials, the mount can ensure a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions.

The Starlink Pipe Adapter is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

PIPE NOT INCLUDED. ONLY INTENDED TO BE USED WITH METAL PIPES, NOT PVC AND PLASTIC PIPES

Compatibility: Starlink Standard
Kit Contents: Pipe Adapter, Allen Key, 20x Routing Clips
Recommended Tools: None
Package Dimensions: 250 x 179 x 113 mm (9.8 x 7.0 x 4.4 in)
Package Weight: 0.971 kg (2.14 lbs)

Installation Guide (Mesh)

Quick View

Starlink Standard Gen 3 Mesh Router

*Includes shipping and handling fees.

The Gen 3 Router introduces WiFi 6 and tri-band radios to Starlink. With improved range, performance, and device support, the Starlink Gen 3 router will extend your WiFi network throughout your home to provide a more consistent and reliable connection with faster speeds.

The Gen 3 Router can be purchased to mesh with your existing Starlink router setup or you can replace your existing Gen 1 or Gen 2 router

Note – Replacing Gen 2 router with a Gen 3 router requires an Ethernet Adapter and bypass mode. See the installation guides below for setup details and suggested tips.

Mesh Compatibility: Compatible with Starlink Gen 2 router and Starlink Gen 3 router. Not compatible with Starlink Gen 1 routers or 3rd party mesh systems.

Note – Wired mesh connection to a Gen 3 router from a Gen 2 router requires an Ethernet Adapter. Starlink App required.

Ethernet Ports: Two (2) Latching Ethernet LAN ports with removable cover

Product Dimensions: 2.4” x 11.8” x 4.7” / 55 x 300 x 120 mm

Package Dimensions: 14.25” x 6” x 4” / 361 x 154 x 101 mm

Package Weight: 6 lbs / 2.7 kg

Installation Guide (for Standard Actuated)

Installation Guide (for Standard Actuated – Circular)

Quick View

Starlink Gen 2 Mesh WiFi Router

*Price includes shipping and handling fees

Starlink Mesh WiFi Routers can be used either as a primary router or a mesh router to wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.See installation guide below for more setup details and tips. We recommend a maximum of 3 Mesh WiFi routers per Starlink network setup. Please note Flat HP purchases after April 11th 2024, will likely require purchase of an HP 2M Starlink router cable to connect a Starlink Mesh router as your primary router.

Compatibility: Compatibility: Rectangular Starlink Kit, Standard Actuated Kit, Flat High Performance, High Performance Starlink App required.

Package Dimensions: 8.8″ x 11.3″ x 4″ / 22.4 x 28.6 x 10 cm

Package Weight: 3.75 lbs / 1.72 kg

Quick View

Starlink Standard V3 Masonry Routing Kit

*Price includes shipping and handling fees

Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bits, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder, Goggles, Gloves, and Mask

Package Dimensions: 13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm

Package Weight: 2.1 lbs / 1 kg

Quick View

Starlink Standard V3 Cable Routing Kit

*Price includes shipping and handling fees

Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Drill, Stud / Electrical Finder

Package Dimensions: 3.75″ x 5.25″ x 1.75″ / 34.9 x 13.3 x 4.4 cm

Package Weight: 0.83 lbs / 0.38 kg